Position:News > Company news

Teach you how to prevent bearing rust


Bearings are product parts used in many places, but after using for a long time, we will also find that the bearings are prone to rust, and because they are in the machine, we use the machine sometimes. There will be inconvenience in operation, so we will use lubricating oil. Therefore, the bearing is not only easy to rust, but also there will be a lot of grease on the surface. Then how should we prevent the bearing from rusting? Let me talk about it with you.
Methods to prevent bearing rust
1. Spraying method: some relatively large anti-rust materials are not suitable for immersion method, because we can not find a large machine that can be installed, so generally use about 0.75Mpa pressure filtered compressed air to spray in a clean air place , This spraying method is suitable for solvent-diluted anti-rust oil or thin-layer anti-rust oil, but we need to have more perfect fire protection and labor protection measures for the suitability of this method.
2. Soaking method: some relatively small bearings can be immersed in anti-rust grease. The thickness of the oil film can be achieved by controlling the temperature or viscosity of the anti-rust grease. A layer of anti-rust grease is attached to the surface. Methods.
3. Brushing method: When brushing, you must pay more attention to evenly smear the surface of the bearing, avoid accumulation, and pay more attention to prevent leakage.
These three points are the methods our bearing manufacturers use to prevent bearing rust. We can learn more about what we use, and we must do it first when we use it, so that we won’t get rusty when we produce bearings. , It can be used for a longer time, because we have prepared the preparations by doing this, which is very helpful for the bearing.